EasyManuals Logo

Keysight EXA N9010A Measurement Guide

Keysight EXA N9010A
73 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #61 background imageLoading...
Page #61 background image
61
Basic Electrical Relationships
C: Basic Electrical Relationships
The decibel is used extensively in electromagnetic measurements. It is the log of the
ratio of two amplitudes. The amplitudes are in power, voltage, amps, electric field
units and magnetic field units.
decibel = dB = 10 log (P2/P1)
Data is sometimes expressed in volts or field strength units. In this case, replace
P with V2/R.
If the impedances are equal, the equation becomes:
dB = 20 log (V2/V1)
A unit of measure used in EMI measurements is dBμV or dBìA. The relationship of
dBμV and dBm is as follows:
dBμV = 107 + PdBm
This is true for an impedance of 50Ω.
Wave length (l) is determined using the following relationship:
λ = 3x108/f (Hz) or λ = 300/f (MHz)

Other manuals for Keysight EXA N9010A

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Keysight EXA N9010A and is the answer not in the manual?

Keysight EXA N9010A Specifications

General IconGeneral
BrandKeysight
ModelEXA N9010A
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals