M8000 Series of BER Test Solutions
Tips for Preventing Damage
Tools shipped with M8000 series modules
Table 1 lists the tools that are shipped with M8000 series modules. The
type of wrench you receive in the kit may vary depending on the module
you procure. The sections below specify the type of wrench you require for
the connection and removal of the associated cables.
Table 1 Tools shipped with M8000 series modules
Figure 1 Tools shipped with modules
For more information about Keysight recommended wrenches, refer to
https://www.keysight.com/in/en/lib/resources/technical-specifications/w
hat-torque-wrenches-and-openended-wrenches-does-keysight-recomme
nd-for-connecting-rf-connectors-2516881.html.
Tool type Part number Description
Wrench M8042-03801 9 mm
Counter Wrench 54964-03801 2 mm thick, dual-ended, fits 6 mm and 7 mm
Counter Wrench 54964-03802 1.5 mm thick, dual-ended, fits 8 mm
Torque Wrench 8710-1765 Torque 8 lb-in, 5/16 Inch
Torque Wrench 8710-2812 Torque 4-in-lb 6 mm
To Next Page
Loading...
