Need help?Do you have a question about the Keysight MSOX3104T and is the answer not in the manual?
General| Bandwidth | 1 GHz |
|---|---|
| Sample Rate (analog) | 5 GSa/s |
| Sample Rate (digital) | 5 GSa/s |
| Form Factor | Benchtop |
| Waveform Update Rate | Up to 1, 000, 000 wfms/s |
| Vertical Resolution | 8 bits |
| Input Impedance | 1 MΩ |
| Maximum Input Voltage | 300 Vrms |
| Trigger Types | Edge, Pulse Width |
| Interface | USB, LAN, GPIB |
| Operating Temperature | 0 to 50 °C |
| Channels | 4 analog + 16 digital |
| Memory Depth (analog) | 4 Mpts |
| Memory Depth (digital) | 1 Mpts |
Alerts users to potential hazards and necessary precautions for safe operation.
Provides a summary of the oscilloscope's features and available models.
Steps for unpacking, powering on, connecting probes, and basic waveform acquisition.
Explains front panel controls, touchscreen gestures, and menu navigation.
Details the different elements of the oscilloscope display interface.
Instructions for setting horizontal scale, delay, panning, and zooming.
Adjusting vertical scale, position, and channel settings.
Details input impedance, coupling, bandwidth limiting, and probe options.
Configuration of FFT source, display modes, units, and windowing.
Steps for connecting digital probes and acquiring waveforms.
Covers adjusting trigger level, forcing triggers, and basic trigger types.
Guides on choosing trigger modes (Auto/Normal) and coupling options.
Control of acquisition states and single-shot events.
Steps for adding, configuring, editing, and clearing measurements.
Procedures for creating masks using Automask and configuring test options.
Procedures for making connections, running analysis, and viewing/saving results.
Configuring USB, LAN interfaces, and network connections.
Steps to connect and access the oscilloscope's web interface for control.
To Next Page