Triggers 11
Keysight InfiniiVision 3000T X-Series Oscilloscopes User's Guide 183
2 In the Trigger Menu, press the Trigger softkey; then, turn the Entry knob to
select Rise/Fall Time.
3 Press the Source softkey, and turn the Entry knob to select the input channel
source.
4 Press the Rising Edge or Falling Edge softkey to toggle between edge types.
5 Press the Level Select softkey to select High; then, turn the Trigger Level knob to
adjust the high level.
6 Press the Level Select softkey to select Low; then, turn the Trigger Level knob to
adjust the low level.
You can also push the Trigger Level knob to toggle between High and Low
selection.
7 Press the Qualifier softkey to toggle between "greater than" or "less than".
8 Press the Time softkey, and turn the Entry knob to select the time.
Near Field Communication (NFC) Trigger
NFC (Near Field Communication) triggering is used to capture waveforms used in
NFC testing.
To Next Page
Loading...
Need help?
General
