Keysight MSOX3104T User Manual

Measurements 15
Keysight InfiniiVision 3000T X-Series Oscilloscopes User's Guide 265
Maximum units are in dB and X at Max Y units are in Hertz for FFT.
Count Measurements
• “Positive Pulse Count" on page 265
• “Negative Pulse Count" on page 265
• “Rising Edge Count" on page 266
• “Falling Edges Count" on page 266
Positive Pulse Count
The Positive Pulse Count measurement is a pulse count for the selected waveform
source.
This measurement is available for analog channels.
Negative Pulse Count
The Negative Pulse Count measurement is a pulse count for the selected waveform
source.
Positive pulse count

Keysight MSOX3104T Specifications

General

Brand	Keysight
Model	MSOX3104T
Category	Test Equipment
Language	English