Need help?Do you have a question about the Keysight 6 Series and is the answer not in the manual?
General| Display | 12.1-inch capacitive touch screen |
|---|---|
| Input Coupling | AC, DC, GND |
| Type | Mixed Signal Oscilloscope |
| Channels | 4 analog, 16 digital |
| Input Impedance | 1 MΩ |
| Interface | USB, LAN, HDMI, GPIB (optional) |
| Operating Temperature | 0 °C to +50 °C |
Explains why site preparation is critical for the i3070 system.
Summarizes Keysight's and customer's site preparation duties.
Details the process phases and provides a checklist for site tasks.
Guidance on creating a drawing for site preparation planning.
Defines roles and responsibilities of specialists for site preparation.
Covers floor load-bearing, anti-static needs, and precautions.
Details clearance for movement and system dimensions.
Specifies equipment operational ratings and storage guidelines.
Explains the need for RF attenuation based on standards.
Provides methods for calculating required site attenuation.
Discusses airborne contaminants and their impact on the system.
Specifies operating and storage temperature/humidity ranges.
Details heat dissipation estimates for site cooling.
Defines the customer's role in providing AC power.
Covers disconnect, wiring, and power quality assessment.
Explains PDU re-wiring needs and provides wiring diagrams.
Explains system use of air/vacuum and defines key terms.
Details pressure, flow rate, and air quality for compressed air.
Provides guidelines for vacuum pump selection and installation.
Covers inventory, uncrating, and initial placement of the system.
Information on Keysight's services for system relocation.
To Next Page