6-10 Keysight N9912A Service Guide
Replaceable Parts
Replaceable Parts Listings
6-
Case Group
1
Reference
Designator
Part Number Qty Description
Replacement Assemblies
Front
Enclosure
Assembly
N9912-60020 1 Front Enclosure Assembly—Includes:
Front case with A1 keypad installed (1)
RFI O-strip, hollow (2)
LCD lens filter (3)
Keypad overlay (4)
Model label, nameplate overlay, 4 GHz (5)
Model label, nameplate overlay, 6 GHz (5)
Rear Enclosure
Assembly
N9912-60022 1 Rear Enclosure Assembly—Includes:
Rear case (6)
RF gap pad (7)
Rear panel overlay (8)
I/O Panel
Assembly
N9912-60023 1 I/O Panel Assembly—Includes:
System board connector panel (I/O side panel) (9)
Overlay, I/O panel top (USB) (10)
Overlay, I/O panel middle (SD) (11)
Overlay, I/O panel bottom (LAN) (12)
Kick Stand
Assembly
N9912-60028 1 Kick Stand Assembly—Includes:
Kickstand (13)
Friction hinge (14)
Screw (for hinge), qty 4 (15)
Hinge cover (16)
Screw (for hinge cover), qty 4 (17)
Spacer (for hinge), qty 2 (29)
Separately Replaceable Individual Parts and Assemblies
(14) 3110-0654
Was 3110-0629
1 Friction hinge
(15) 0515-1940 4 Screw, machine w/patch lock, pan head, M2.5 x 6 mm
(16) W1312-40068 1 Hinge cover
(17) 0515-5133 4 Screw, machine, button head, M3.0 x 8 mm
(18) 0515-5153 6 Screw, machine, w/flat washer, pan head, M3.0 x 35 mm
(19) N9912-60007 1 Battery cable
(20) W1312-40060 1 Battery door cover
(21) N9912-40006 2 Hole plugs
(22) 0515-1521 2 Screw, machine, 90-deg flat head, M3.0 x 5 mm
1. Each time the N9912A case is opened for any reason, you must order a Repair and Re-assembly Kit. See
“Miscellaneous Parts” on page 6-12.
To Next Page
Loading...
