7-8 Keysight N9912A Service Guide
Repair and Replacement Procedures
Removing and Replacing the Case Group Parts
7-
2. To replace the entire kickstand assembly:
a. Lift the kickstand assembly off of the rear case and discard it.
b. Place the new kickstand assembly on the rear case.
c. Place the new hinge cover in position and secure it with four new
screws. A new hinge cover and new screws are provided in the
Repair and Re-assembly Kit.
3. To replace the hinge cover:
a. Position the new hinge cover in place and install four new screws.
New screws are provided in the Repair and Re-assembly Kit.
4. To replace the hinge:
a. Lift the kickstand assembly off of the rear case.
b. Remove and discard the four hinge attachment screws (item 2).
c. Place the new hinge in position and install with four new screws.
New screws are provided in the Repair and Re-assembly Kit.
d. Place the kickstand assembly in place on the rear case and reinstall
the hinge cover with new screws provided in the Repair and
Re-assembly Kit.
To Next Page
Loading...
