Keysight PNA-X Series User Manual

The following diagram shows the power levels for the various mixer congurations.
Figure 39. 85309B external mixer congurations.
85309B options
85309B Standard Provides one test channel and one reference channel
85309B Option 001 Adds one additional test channel; provides a total of two test
channels and one reference channel.
85309B Option 002 Adds two additional test channels; provides a total of three test
channels and one reference channel.
85309B Option 400 Low and high frequency bands; one test channel0.1 to 1 GHz low
frequency band; 0.3 to 18 GHz high frequency band.Provides a
total of one test channel and one reference channel.
85309B Option 401 Low and high frequency bands, two test channels0.1 to 1 GHz low
frequency band; 0.3 to 18 GHz high frequency band. Adds one
additional test channel. Provides a total of two test channels and
one reference channel.
85309B Option 402 Low and high Frequency bands, three test channels
Option 1CM Rack mount kit without handles
Option 1CP Rack mount kit with handles
1. Mixers are operated in the 3rd harmonic
mode.
Pin =
6 to 10 dBm
Po =
16 dBm
(0.3 - 3 GHz)
Pmxr =
8 to 16 dBm
8 dB max.
Test
chan.
Ref
chan.
ALC
85320A/B
Opt H20
Dwn conv. mixers
0.3 - 3 GHz
L.O./I.F. Dist. unit
85309B
LO
in
LO out
Pin =
0 to 6 dBm
Po =
19 dBm
(2 -18 GHz)
Pmxr =
8 to 16 dBm
11 dB max.
Test
chan.
Ref
chan.
ALC
85320A/B
Dwn conv. mixers
2 - 18 GHz
L.O./I.F. Dist. unit
85309B
LO
in
LO out
Pin =
0 to 6 dBm
Po =
20.4 dBm
(2 - 8.85 GHz)
Pmxr =
8 to 16 dBm
12.4 dB max.
Test
chan.
Ref
chan.
ALC
85320A/B
Dwn conv. mixers
6 - 26.5 GHz
1
L.O./I.F. Dist. unit
85309B
LO
in
LO out
Pin =
0 to 6 dBm
Po =
19 dBm
(2 - 18 GHz)
Pmxr =
12 to 17 dBm
7 dB max.
Test
chan.
Ref
chan.
ALC
85320A/B
Opt H50
Dwn conv. mixers
2 - 18 GHz
L.O./I.F. Dist. unit
85309B
LO
in
LO out
Pin =
0 to 6 dBm
Po =
19 dBm
(6 - 16.7 GHz)
Pmxr =
12 to 17 dBm
7 dB max.
Test
chan.
Ref
chan.
ALC
85320A/B
Opt H50
Dwn conv. mixers
18 - 50 GHz
1
L.O./I.F. Dist. unit
85309B
LO
in
LO out
PNA-X N5242A network analyzer (Option 020)
PNA N522xA network analyzer (Option 020)
or
or
or
PNA-X N5264A measurement receiver
Legacy PNA E836xC network analyzer (Option H11)
56 | Keysight | Antenna Test – Selection Guide

Keysight PNA-X Series Specifications

General

Output Power	+13 dBm (typical)
Number of Ports	2 or 4
Dimensions	426 mm (W) x 470 mm (D)
Power Requirements	100 to 240 VAC, 50/60 Hz
Frequency Range	10 MHz to 26.5 GHz (varies by model)