Keysight U1241B - Reviewing Logged Data; Removing Logged Data

Features and Functions 2
Keysight U1241B and U1242B User’s and Service Guide 43
Figure 2-2 Interval logging display
Reviewing Logged Data
1 Press (View) for more than one second to enter Log View mode. The
last recorded entry and last logging index are displayed on the secondary
display.
2 Press to ascend or to descend through logged data. Press to select
the first record and press to select the last record for quick navigation.
3 Press to switch between hand (manual) and interval (automatic)
logging review mode.
4 Press (View) for more than one second to exit Log View mode.
Removing Logged Data
Press (Log) for more than one second at the respective Log Review mode
(hand or interval) to clear all logged data in the memory.
NOTE
Maximum data that can be stored is 200 entries. When the 200 entries are filled,
FUL annunciator is indicated on the secondary display.