AIR CONDITIONER FEATURES(CONTINUED)
TO SELECT THE
OPERATING MODE:
Auto Auto
Cool Low
F_Dry Med
E_aer_rY On/Off
TO USE THE ENERGY
SAVER FEATURE:
cool Low
Dry Med
Fan igh
E_'aer_rY On/Off
DO THIS:
i Press the Mode
button.
DO THIS:
/Press the button
NOTE:
• To choose operating mode, press the Mode button.
Each time you press the button, a mode is selected
in a sequence that goes from Auto, Cool, Dry to
Fan. The indicator light besides will be illuminated
and remained on once the mode is selected.
To operate on Auto feature:
• In this mode, the fan speed can not be adjusted, it
starts automatically at a speed according to the
room temperature. If the room does not get too
warm, it will stay at Low speed.
To operate on Fan Only:
• Use this function only when cooling is not desired,
such as for room air circulation or to exhaust stale
air(on some models). (Remember to open the vent
during this function, but keep it closed during
cooling for maximum cooling efficiency.) You can
choose any fan speed you prefer.
• During this function, the display will show the actual
room temperature, not the set temperature as in the
cooling mode.
NOTE:
In this mode, the fan will continue to run for 3 minutes
after the compressor shuts off. The fan then cycles
on for 2 minutes at 10 minute intervals until the room
temperature is above the set temperature, at which
time the compressor turns back on and cooling starts.
SLEEP FEATURE:
/
em0 Tem
.... 0_
Off
c,?e_k s,eep
....l l....
Cool LOW
Dry Med
Fan High
-- DO THIS:
Press Sleep
button
NOTE:
In this mode the selected temperature will increase
by 2°F(1°C) 30 minutes after the mode is selected.
The temperature will then increase by another 2°F
(1°C) after an additional 30 minutes. This new
temperature will be maintained for 7 hours before it
returns to the originally selected temperature. This
ends the Sleep mode and the unit will continue to
operate as originally programmed. The Sleep mode
program can be cancelled at any time during operation
by pressing the Sleep button again.
7
To Next Page
Loading...
