Installation
SE45w 9
1. Freespool winch and pull out approx. 2 feet of cable.
2. Pull Hairpin and release clevis pin from winch hook.
3. Safely pull your winch line loop through the hole in the
hook stopper, position mid-way down winch line. It can
help to use a zip tie or string to pull through.
4. Re-attach hook to cable end.
5. To stow hook, engage clutch and retract cable onto
winch spool until hook is snug against the hook stopper
and fairlead
6. Position hook stopper at approx. ¾ of the total line distance towards hook while using your winch to
help reduce whip back in the event of cable breakage.
Cable Hook Stopper Installation and Use
To Next Page
Loading...
