KI Pirouette - Table of Contents

2
Pirouette
®
Tables - Nesting-Base - Table of Contents
Assembly Instructions
Nesting-Base
Nesting Leg Assembly............................................................................3
Nesting Leg Installation..........................................................................4
Power Modules
Dean Clamp-On Power Module Installation ...........................................6
Dean In-Surface Power Module Installation ...........................................7
Dubbel Undersurface Power Module Installation ...................................8
Nacre In-Surface Pop-Up Power Module Installation ............................. 9
Node In-Surface Power Module Installation ......................................... 10
Grommets
Grommet Overview ............................................................................... 11
Dean & Nacre Grommet Installation ...............................................11
Node Grommet Installation ............................................................11
Electrical
Electrical Overview ............................................................................... 12
Pattern Electrical System Installation....................................................12
Pattern Infeed Kit Assembly ...........................................................12
Pattern Table-to-Table Kit Assembly ...............................................13
Snap-In Module Installation ...........................................................14
Cable Routing Guidelines - Tables with Snap-In RPT Modules ......14
Cable Routing Guidelines - Power Module for Pattern ...................15
Wire Management
Wire Trough Installation - Tables with a Power Module with 3-Prong Plug .16
Wire Trough Installation - Tables with Power Modules for Pattern .......17
Velcro Wire Manager Installation .........................................................18
Strain Relief Clip Installation ................................................................19
Vertical Wire Manager Installation ........................................................20
Ganging
Peg Installation ....................................................................................21
Side-to-Side Ganging - 24”, 30” & 36” Deep Tables ............................22
Side-to-Side Ganging - 18” Deep Tables .............................................23
Back-to-Back Ganging .........................................................................24
Connections to Power Source
Connections to Power Source Overview ............................................... 25
Connections to Power Source - Pattern Electrical System ....................25
Connections to Power Source - Power Modules with 3-Prong Plug ....26
Pattern Quick-Release Tool
Pattern Quick-Release Tool ..................................................................27
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical furnishing, basic precautions should always be
followed, including the following:
Read all instructions before using (this furnishing).
DANGER: To reduce the risk of electric shock:
1. Always unplug this furnishing from the outlet before cleaning or servicing.
WARNING: To reduce the risk of burns, fire, electric shock, or injury to
persons:
1. Unplug from outlet before putting on or taking parts off parts.
2. Close supervision is necessary when this furnishing is used by, or near
children, invalids, or disabled persons.
3. Use this furnishing only for its intended use as described in these
instructions. Do not use attachments not recommended by the manufacturer.
4. Do not use outdoors.
5. WARNING: Risk of Electric Shock - Connect this furnishing to a properly
grounded outlet only. See Grounding Instructions.
6. WARNING: Risk of Electric Shock, Fire, and Injury - Review instructions to
confirm all critical components are installed and function safely.
SAVE THESE INSTRUCTIONS
Pattern Electrical System
Power Modules with 3-Prong Plug
Electrical Rating: 120V 15 A
WARNING: Risk of Injury-Maximum Load 4.7 lb per inch width.
Electrical Rating: 120V 15 A
WARNING: Risk of Injury- Maximum Load 4.7 lb per inch width.