Need help?Do you have a question about the KI Concerto and is the answer not in the manual?
Lists essential tools for assembly.
Specifies construction requirements for upright installation.
Details required fasteners for floor mounting.
Provides a sequential guide for the assembly process.
Guides initial placement and marking for uprights without power/data.
Guides initial placement and marking for uprights with power.
Provides center-to-center dimensions for various radius installations.
Outlines acceptable tolerances for upright spacing.
Details the process for installing standard uprights.
Details the process for installing uprights with power and data.
Instructs on how to attach the seat backs to the uprights.
Guides the installation of electrical distribution harnesses.
Explains the electrical connection for aisle lights.
Details the process for routing and connecting data wires.
Covers installation of tablet arms and full-height side covers.
Details the installation of half-height side covers.
Covers the installation of data infeed side covers.
Guides the installation of power infeed components.
Provides instructions for attaching seat assemblies to uprights.
Details installation of decorative end panels.
Explains installation of ADA compliant uprights with flip-arm caps.
Details installation of small tablet arms.
Guides the installation of ADA removable bases.
Provides instructions for adding power/data to existing seating.
Describes the power infeed harness and its routing.
Diagram showing power/data infeed for right side configuration.
Diagram showing power/data infeed for left side configuration.
Diagram showing power/data infeed for center configuration.
Details the precise location for data infeed connection.
Explains wiring power infeed to building electrical sources.
General| Brand | KI |
|---|---|
| Model | Concerto |
| Category | Indoor Furnishing |
| Language | English |
To Next Page
