KI Sift User Manual

Required
Tools
Disassembly Instructions
Material Type:
Warning: This drawing format requires special non-standard fonts!!
Make sure the appropriate font files are installed!!!
TT Humanst 521 BT Light
O HelveticaLTStd-Cond
O HelveticaLTStd-LightCond
Sift
®
Task Arm Chair
Page 1 of 2Rev. 0 ©2013 Krueger International, Inc. All Rights Reserved · P0033-0089
A .Steel B. Aluminum C. Plastic
KI · 1330 Bellevue Street · P.O. Box 8100 · Green Bay, WI 54308-8100 · 1-800-424-2432 · www.ki.com
Procedure:
1. Remove the chair base from the underside of the chair using
a rubber mallet.
2. Twist out the pneumatic height adjustment cylinder from the
seat mechanism assembly using pliers
Caution: contents under pressure!
(continued on next page)
General Notes:
1. Disassembly time: 15-30 minutes
2. This procedure assumes basic familiarity with hand tools and
furniture terminology: no specialized training is required
3. All materials removed and disassembled shall be sorted and
segregated with like materials and disposed of or recycled
according to recycling availability or waste acceptance
4. For items to be recycled, refer to KI's End of Life Recycling
Matrix and KI's End of Life Recovery Options Matrix, available
at www.ki.com
Fasteners (not shown) are Material Type A: Steel
Safety Glasses
Channel Lock Pliers
Rubber Mallet
Gloves
A
C

KI Sift Specifications

General

Brand	KI
Model	Sift
Category	Indoor Furnishing
Language	English

Summary

Disassembly Procedure

Remove Chair Base

Remove the chair base from the underside of the chair using a rubber mallet.

Remove Pneumatic Height Adjustment Cylinder

Twist out the pneumatic height adjustment cylinder from the seat mechanism assembly using pliers.

Remove Backrest Assembly

Remove screws holding the backrest assembly onto the seat mechanism and remove the backrest and bracket.

Remove Arm Screws

Remove screws holding the arms to the seat and remove the arms and plate from the seat.

Remove Backrest Tension Knob and Height Lever

Remove screws for the backrest tension knob and height adjustment lever, then slide off the lever.

Remove Seat Mechanism

Remove screws holding the seat mechanism to the seat and remove the mechanism.