7
Listening to radio
If the unit is not yet in radio mode:
Press FM or AM.
The unit switches to radio mode.
Select waveband
In radio mode:
Press FM or AM to select the desired
waveband.
Available wavebands:
FM 123: Memory for up to 18 manu-
ally programmable FM stations.
FM AST: Memory for up to 6 auto-
matically stored FM stations.
Selection of MW
MW 1: Memory for up to 6 manually
programmable MW stations.
MW AST: Memory for up to 6 auto-
matically stored MW stations.
LW: Memory for up to 6 manually
programmable LW stations.
Autostore
Automatic storage of strong stations in
the current waveband (FM AST, AM AST
and MW AST).
Press and hold AST button to acti-
vate/deactivate this function.
The maximum possible number of
stations for each band is 6.
Execute “Autostore” to update the list
of the stations with strong reception
(e.g. when driving through different
receiving areas).
Automatic search
Press the or button for the
previous/next station receivable sta-
tion in the currently selected wave-
band.
It will always starts to search for
strong signal station at LOCAL
search level. If no station can be
found at LOCAL level, it will search at
DISTANCE level.
To exit, press or button
respectively.
Manual seek
Manual reception frequency setting.
Rotate the knob clock-
wise or anti-clockwise to increment or
decrement the frequency.
Frequency Scan
Radio will tune to each available station
from the current waveband for 10 sec-
onds before scanning for the next higher
frequency station.
Press SCAN button to activate/ deac-
tivate the scan function.
Station memory
In the FM 123 waveband there are 18
station memories, in the “123” wave-
bands for MW and LW there are 6 station
memories each
(also see “Select waveband”).
Storing preset stations
Tune to the desired station.
Press and hold one of the preset (1 -
6) buttons until you hear a confirma-
tion tone.
The station selected is stored on the
preset button.
You can also select a station in a dif-
ferent waveband (e.g. FM AST or FM
123) and then store this on one of the
preset buttons.
Recalling preset stations
Tune to the desired station.
Select the button (1 - 6) for memo-
rized station.
Radio
To Next Page
Loading...
