EasyManua.ls Logo

Kia Syros 2025 - Tyre Maintenance; Tyre Sidewall Labeling; Wheel Size Designation

Kia Syros 2025
468 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Maintenance
388
Tyres and wheels
Tyres should be replaced when tread
wear indicators appear. Slow down
whenever there is rain, snow or ice on
the road to reduce the possibility of los
-
ing control of the vehicle.
Tyre maintenance
In addition to proper inflation, correct
wheel alignment helps to decrease tyre
wear.
If you find a tyre is worn unevenly, have
your dealer check the wheel alignment.
When you have new tyres installed,
make sure they are balanced. This will
increase vehicle ride comfort and tyre
life. Additionally, a tyre should always be
rebalanced if it is removed from the
wheel.
Tyre sidewall labeling
This information identifies and describes
the fundamental characteristics of the
tyre and also provides the Tyre Identifi
-
cation Number (TIN) for safety standard
certification.
The TIN can be used to identify the tyre
in case of a recall.
1. Manufacturer or brand name
Manufacturer or Brand name is shown.
2. Tyre size designation
A tyre's sidewall is marked with a tyre
size designation. You will need this infor
-
mation when selecting replacement
tyres for your vehicle. The following
explains what the letters and numbers in
the tyre size designation mean.
Example tyre size designation:
(These numbers are provided as an
example only; your tyre size designator
could vary depending on your vehicle.)
215/60R16 91H
215: Tyre width in millimeters.
60: Aspect ratio. The tyre's section
height as a percentage of its width.
R: Tyre construction code (Radial).
16: Rim diameter in inches.
91: Load Index, a numerical code
associated with the maximum load
the tyre can carry.
H: Speed Rating Symbol. See the
speed rating chart in this section for
additional information.
Wheel size designation
Wheels are also marked with important
information that you need if you ever
have to replace one. The following
explains what the letters and numbers in
the wheel size designation mean.
Example wheel size designation:
6.5JX16
6.5: Rim width in inches.
J: Rim contour designation.
16: Rim diameter in inches.
Tyre speed ratings
The chart below lists many of the differ
-
ent speed ratings currently being used
for passenger vehicle tyres. The speed
rating is part of the tyre size designation
on the sidewall of the tyre. This symbol
corresponds to that tyre's designed
maximum safe operating speed.
OQYi073038

Table of Contents

Related product manuals