69
5
5
Features of your vehicle LCD windows
One time driving information mode
The vehicle will display Driving Infor
-
mation once per one ignition cycle.
䳜 Fuel efficiency is calculated after
the vehicle has run for more than
300 meters.
䳜 The Driving Information will be
reset 4 hours after ignition has
been turned off. So, when the
vehicle ignition is turned on within
4 hours, the information will not
be reset.
䳜 If you press "OK" button for more
than 1 second after the Driving
Information is displayed, the
information will be reset.
䳜 If the engine is running, even
when the vehicle is not in motion,
the information will be accumu
-
lated.
Digital speedometer
This mode displays the current
speed of the vehicle.
Transmission temperature gauge
(For dual clutch transmission)
This mode displays the transmission
temperature.
CD_PHEV_LHD_features_driving.book Page 69 Thursday, November 14, 2019 10:22 PM
To Next Page
Loading...
