Features of your vehicle
705
LCD windows
Energy flow
The hybrid system informs the
driver about its energy flow in vari
-
ous operating modes. While driving,
the current energy flow is specified
in 11 modes.
* For more details, refer to "Plug-in
hybrid vehicle energy flow" on page
1-29.
Service mode
Service in
It calculates and displays when you
need a scheduled maintenance ser
-
vice (mileage or days).
If the remaining mileage or time
reaches 1,500 km (900 mi.) or 30
days, 䳖Service in䳗 message is dis
-
played for several seconds each
time you set the ENGINE START/
STOP button to the ON position.
Service required
If you do not have your vehicle ser
-
viced according to the already
inputted service interval, 䳖Service
required䳗 message is displayed for
several seconds each time you set
the ENGINE START/STOP button to
the ON position.
To reset the service interval to the
mileage and days you inputted
before:
䳜 Press the OK button (Reset) for
more than 1 second.
If any of the following conditions
occurs, the mileage and days may
be incorrect.
䳜 The battery cable is disconnected.
䳜 The fuse switch is turned off.
䳜 The battery is discharged.
User settings mode (if equipped)
On this mode, you can change set
-
ting of the doors, lamps, and so on.
The information provided may dif
-
fer depending on which functions
are applicable to your vehicle. If an
infotainment system is equipped,
the user settings menus and items
may differ. Refer to the infotain
-
ment system manual.
CD_PHEV_LHD_features_driving.book Page 70 Thursday, November 14, 2019 10:22 PM
To Next Page
Loading...
