Kicker X50s Competition - Specifications

SPECIFICATIONS
Number of channels 2 (Stereo) 1 (Bridged Mono)
Rated power/channel Into 402, 25W 100W
no more than 0.02% THD, 20Hz to 20KHz,
both channels driven 12.5-16VDC
Rated power/channoal Into 202, 50W 200W
no more than 0.02% THD, 20Hz to 20KHz,
both channels driven 12.5-16VDC
Rated power/channel into 192, 100W 340W
no more than 0.02% THD, 20Hz to 20KHZ,
both channels driven, 12.5-16VDC
Rated power/channel Into 1/292, 170W (not recommended)
no more than 0.05% THD, 20Hz to 20kHz,
bridged mono, 12.5-16VDC
Mox Current Draw, 55A
1/2Q stereo load or 12 bridged load
Frequency Response, (+0, -1dB) 10 Hz to 30 kHz
Signal to Nolse Ratio, >100 dB
unweighted, relative to rated power/channel
Input Impedance 22 KQ
Input Sensitivity range 125mV - 2.5V
Slew Rate 20Vms
Damping Factor, @422 >500
11