Kidde Gemini II User Manual

7-15November 2002 06-235975-001
Kidde Gemini II System
a. Press the down arrow to display the Main Menu.
b. Select ‘Set’.
c. Scroll down and select ‘Stop Valve Control’.
d. Select ‘Add S/valve slave’.
e. The first registered RHU will be shown. Use the
down arrow keys to select the RHU to be set as a
stop valve control slave.
f. Select OK. A message will be sent to the selected
RHU configuring it as a Stop Valve Control Slave.
When there are one or more Stop Valve Control
Slaves the MCP will react to any Stop Valve mes-
sage as a Stop Valve Control Master.
2. Removing a Stop Valve Control Slave Device:
a. Press the down arrow to display the Main Menu.
b. Select ‘Set’.
c. Scroll down and select ‘Stop Valve Control’.
d. Select the ‘Remove S/valve slave’.
e. The first RHU configured as a Stop Valve Control
Slave will be shown. Use the down and up arrow
keys to select the RHU to be removed from Stop
Valve Control.
f. Select OK. A message will be sent to the selected
RHU configuring it not to be a Stop Valve Control
Slave. When there are no more Stop Valve Control
Slaves the MCP will not react to any Stop Valve
message as a Stop Valve Control Master.
7-5 CANADIAN SYSTEMS
See Appendix F for installation and configuration require-
ments for Canadian systems.
firealarmresources.com

Kidde Gemini II Specifications

General

Brand	Kidde
Model	Gemini II
Category	Fire Alarms
Language	English