Chapter 2: Basic operating instructions
24 VM-1 User Guide
5. When finished, press the Backspace button to return to the Reports Menu or
press the Menus button to exit.
Viewing history reports
The history report lists the last 1,000 events or operator instructions processed
by the control panel or since its history was cleared. The event or system
command name, address, time and date of occurrence, and the source that
initiated the event or command are included.
The report is structured with the most recent event or instruction listed first. The
report can be displayed for viewing on the LCD screen or printed to a local
printer. The history reports are listed below.
• History with Text: Provides a history of events and operator commands
logged by the panel. For each point that activated or restored, the detail
includes the point’s message text.
• History without Text: Provides a history of events and operator commands
logged by the system. For each point that activated or restored, the detail
includes the point’s device address.
To view a history report:
1. From the Main Menu, choose Reports, and then choose History.
2. Choose one of the reports described above.
3. Enter the panel address (PP).
4. Choose Display and scroll through the report.
— or —
Choose Print Locally.
5. When finished, press the Backspace button to return to the Reports Menu or
press the Menus button to exit.
To Next Page
Loading...
Need help?
General
