Kidde VM-1 User Manual

Chapter 2: Basic operating instructions
26 VM-1 User Guide
3. Choose Display and scroll through the report. The alarm count is on the
second line of the report.
— or —
Choose Print Locally.
4. When finished, press the Backspace button to return to the Reports Menu or
press the Menus button to exit.
Determining panel TCP/IP settings
If your panel is equipped with an Ethernet (TCP/IP) connection, you may be
asked to provide the IP address, subnet mask, and gateway settings.
To determine the panel TCP/IP settings:
1. From the Main Menu, choose Reports, and then choose Revisions.
2. Enter the panel address (PP).
3. Choose Display and scroll through the report. The settings are at the bottom
of the report.
— or —
Choose Print Locally.
4. When finished, press the Backspace button to return to the Reports Menu or
press the Menus button to exit.
Determining if your VM-DACT is NFPA 72
compliant
A DACT Compliance report tells you if the VM-DACT installed in the panel meets
NFPA 72 configuration requirements. The report does not indicate why the
VM-DACT may be noncompliant.
To view the DACT Compliance report:
1. From the Main Menu, choose Reports, and then choose DACT Compliance.
2. Enter the panel address (PP).

Kidde VM-1 Specifications

General

Brand	Kidde
Model	VM-1
Category	Fire Alarms
Language	English