Chapter 2: Basic operating instructions
VM-1 User Guide 25
Finding firmware and database version
numbers
By viewing a Revisions report, you can find the version numbers for the following:
• The CPU firmware
• The project database and the VM-CU used to compile and download the
project database
• The audio database, if equipped with a paging microphone
• The application code (firmware), bootloader code, and database for each card
installed in the panel.
To view the Revisions report:
1. From the Main Menu, choose Reports, and then choose Revisions.
2. Enter the panel address (PP).
3. Choose Display and scroll through the report.
— or —
Choose Print Locally
4. When finished, press the Backspace button to return to the Reports Menu or
press the Menus button to exit.
Viewing the alarm count
The VM-1 control panel records how many times it went into the alarm condition.
During normal operation, the alarm count is displayed on the LCD. When the
VM-1 user interface displays the off-normal screen, you must run a Revisions
report to see the alarm count.
To view the alarm count:
1. From the Main Menu, choose Reports, and then choose Revisions.
2. Enter the panel address (PP).
To Next Page
Loading...
