Kiloview E1 Series User Manual

Version 1.1 © Changsha KILOVIEW Electronics CO.,LTD. All rights reserved
HD Video Encoders · User Manual
25

On the configuration page, it shows video
source image on the area of ① to monitor
whether video source is normal. This image
stream is refreshed in three seconds.
 Click②for main stream configuration (Please
refer to 6.4.2).
 Click③for audio encoding configuration
(Please refer to 6.4.1).

Click “Pushing” for stream service
configuration (Please refer to 6.4.3).

Click “Video Clipping” for video clipping
function.

Click “OSD watermark” for image overlay
function configuration. APP only supports
text and time overlay configuration, image
overlay is configured on Web page (Please
refer to 6.7).

Click “Network” for network configuration
(Please refer to 5.3).

Click “Signal Source” for audio and video
source choice page (Please refer to 6.3).

“Setting” is used for quick reset, device
reboot, restoring factory settings and device
name modifications.
Click and enter into device information
page.

Kiloview E1 Series Specifications

General

Video Input	SDI
Video Output	HDMI, SDI
Audio Input	3.5mm audio jack
Audio Output	3.5mm analog audio output
Encoding	H.264
Network Interface	Gigabit Ethernet
Protocols	RTMP, RTSP, SRT, UDP
Management	Web GUI
Power Supply	DC 12V