Name: Kiloview N3
Brand: Kiloview
Rating: 5 (1 reviews)

To Next Page

To Previous Page

N3 for NDI·

USER MANUAL

5.3 Local-link (Failsafe)

The Failsafe is specifically configured with a dedicated IP address on the Ethernet

interface (It is the default management IP address of Ethernet port).Even if you forget the

Ethernet IP settings, or if the IP address obtained by DHCP cannot be known, you can still

connect and access the device through the default IP address.

"Failsafe" is to bind the device to an independent IP address. This IP address does not

affect the use of other network cards. In special cases, it can be used to manage the

encoder. This address can be changed manually (Usually no need to change), the default

address is 192.168.1.168.

Note: When accessing the device by Failsafe address, your computer must have an IP address

of the same network segment.

Questions and Answers:

Need help?

Do you have a question about the Kiloview N3 and is the answer not in the manual?

Kiloview N3 Specifications

General