Kilowatt Labs SIRIUS CAPACITOR MODULE - Unpacking and Contents Check; Operation Procedures; Module Configuration

Sirius Capacitor Module – User Manual Model Number - 3550-48-B-1.7C-M-SD-A-G
This manual is subject to change without notice and at the sole discretion of Kilowatt Labs, Inc.
Kilowatt Labs, Inc. | www.kilowattlabs.com
17
3.3 Unpacking and Contents Check:
Check the contents of the package.
1) Sirius Capacitor Module: 3.55KWh48VDC 3) USB Cable A-B
2) Screws × 2 4) Washers × 4
4. Operation Procedures:
4.1 Module Configuration:
Follow the steps below to switch ON the Module.
Step 1: Connecting the Load:
Connect the F12 terminals of the Module to the load. F12 terminals are shown in picture below:
Note!
Read the safety Instruction section before installation.
1
2
3
4