Kimo CPE 311-S User Manual

• OFF: alarm is deactivated
• 1/3: rising edge mode
• 2/3: falling edge mode
• 3/3: monitoring mode
➢ Press OK.
“F400” blinks.
➢ Press Up key to go to the F401 folder of the alarm 1 (F411 for alarm 2 and F421 for alarm 3) then press OK.
➢ Press Up or Down key then select the channel where the alarm will be activated.
➢ Press OK.
“F401” blinks.
➢ Press Up key to go to F402 folder (F412 for alarm 2 and F422 for alarm 3) then press OK.
This folder is about the threshold 1 setting.
➢ Set the threshold 1 with Up and Down keys.
➢ Press OK when the last digit is set.
“F402” blinks.
➢ Press Up key to go F403 folder (F413 for alarm 2 and F423 for alarm 3) then press OK.
This folder is about:
• For a rising or falling edge: hysteresis setting
• For a monitoring: threshold 2 setting.
➢ Set the hysteresis or the threshold 2 with Up and Down keys.
➢ Press OK when the last digit has been set.
“F403” blinks.
➢ Press Up key to go to F404 folder (F414 for alarm 2 and F424 for alarm 3) then press OK.
This folder is about the delay time 1 setting.
➢ Set the delay time 1 with Up and Down keys.
➢ Press OK when the last digit has been set.
“F404” blinks.
➢ Press Up key to go to F405 folder (F415 for alarm 2 and F425 for alarm 3) then press OK..
This folder is about the delay time 2 setting.
➢ Set the delay time 2 with Up and Down keys.
➢ Press OK when the last digit has been set.
“F405” blinks.
➢ Press Up key to go to F406 folder (F416 for alarm 2 and F426 for alarm 3) then press OK..
This folder allows to activate or not the audible alarm.
➢ Set the activation of the audible alarm with Up and Down keys:
• 1: audible alarm is activated
• 2: audible alarm is deactivated
➢ Press OK to validate the alarm..
“F406” blinks.
➢ Press Up key to to th F407 folder (F417 for alarm 2 and F427 for alarm 3) then press OK.
This folder is about the acknowledgement of the alarm.
➢ Set the acknowledgement duration of the alarm with Up and Down keys.
➢ Press OK when the last digit has been set.
18 F400: Manage the alarms

Kimo CPE 311-S Specifications

General

Brand	Kimo
Model	CPE 311-S
Category	Transmitter
Language	English