F 408: Alarm latching mode
The latching mode is when the transmitter goes into alarms, it starts beeping and when it goes out of alarm (normal) it
should continue beeping until an operator acknowledges it.
➢ Go to F408 folder (F418 for the alarm 2 and F428 for the alarm 3) then press OK.
➢ Select ON to activate the alarm latching or OFF to deactivate it.
➢ Press OK.
F400: Manage the alarms 19
Delay-time :
10 min
Acknowledgement
Alarm ON
Alarm OFF
Acknowledgement Acknowledgement
LED ON
LED OFF
Latching ON
m
t
Threshold 1
Threshold 2
Acknowledgement
Alarm ON
Alarm OFF
Delay-time :
10 min
Acknowledgement
LED ON
LED OFF
Latching OFF
m
t
Threshold 1
Threshold 2
To Next Page
Loading...
Need help?
General
