TQ Series Technical Manual
Page 5 General Information 9.9.04
Rev. 5
For further information regarding these products, please contact your local Kinetico Dealer.
Wall Mount Systems
Floor Mount Systems
System Sizing TQ 172 / 173
In the application of the TQ 172 / 173 Series wall mount systems, three important site variables must be taken
into account:
Water Temperature
Inlet Pressure
Inlet Water Quality
To determine the output performance of the unit, a compensated inlet pressure must be determined. The
inlet pressure is compensated based on the quality of the inlet water. For each 100 TDS, 1 psi is reduced for
the actual inlet pressure.
Example:
Actual Inlet Pressure 55 psi
Inlet TDS 1,000 mg/l
TDS Pressure Reduction: 1,000 mg/l / (100 (mg/l)/psi) = 10 psi
Compensated Inlet Pressure: 55 psi – 10 psi = 45 psi
Model Name TQ 172 TQ 173 TQ 172n TQ 173n
Part Numbers
Reverse Osmosis System 10162 10163 XX XX
Nanofiltration System XX XX 10166 10167
Rated* Daily Production 150 gpd 225 gpd 200 gpd 300 gpd
Rated* Daily Production 568 lpd 852 lpd 757 lpd 1,136 lpd
Membrane Type Thin Film Composite
Number of Membranes 2323
* Based on feed TDS of 500 mg/l and a water temperature of 77
o
F
Model Name TQ 174 TQ 176
Part Numbers
RO System 120v/60 hz (US Plug) 11585 11560
RO System 230v/50hz (European Plug) 11589 11588
Rated* Daily Production 300 gpd 450 gpd
Rated* Daily Production 1,136 lpd 1,704 lpd
Membrane Type Thin Film Composite
Number of Membranes 46
* Based on feed TDS of 500 mg/l and a water temperature of 77
o
F
To Next Page
Loading...
Need help?
General
