King-Meter T319 LED - Battery Indicator; Error Code; Faq; Quality Assurance and Warranty Scope

KING-METER TECHNOLOGY CO., LTD
No.15, Chenchang Road, Beichen Dist.Tianjin,300134,CN
Fax：+0086 022 8478 0358 Tel: +0086 022 84780378
7
lowest output level, and the level 3 is the highest output power level of the motor.
The default start up level is level 1.
5.5 Battery Indicator
When the battery is in high voltage, the four led battery power light are all light up,
when the battery is in low voltage, the last battery power light will flash to notice
that the battery needs to be recharged immediately.
6. Error Code
When the E-bike electronic control system fails, the display will automatically
flash the LED lights to indicate the error code. Please see Appendix 1 for the
definition of the detailed error code.
Only after the fault is eliminated, the error code interface can be cleared,
the E-bike will not be able to ride when error code occurs.
7. FAQ
Q: Why can’t turn on the display?
A: Please check whether the battery is turned on or the leakage lead wire is
broken.
Q: How to deal with the error code display?
A: Contact the e-bike maintenance station in time.
8. Quality Assurance and Warranty Scope
I, Warranty Information:
1, King-Meter will be responsible for all faults arising during normal operation that
are caused by a quality defect.
2, The warranty time is 18 months from the day the display leaves the factory.