Need help?Do you have a question about the King-Meter SW-U LCD and is the answer not in the manual?
General| Display Type | LCD |
|---|---|
| Compatibility | Electric Bicycles |
| Water Resistance | Yes |
| Voltage | 24V/36V/48V |
| Waterproof Rating | IP65 |
| Functions | Speed, Distance, Battery Level, Assist Level |
Describes the material and operating temperature range of the SW-U display shell.
Lists the various functions and indicators provided by the SW-U display.
Details the layout and components of the SW-U LCD's main display interface.
Explains the function of the buttons used to operate the SW-U LCD display.
Instructions on how to turn the SW-U LCD display and e-bike controller on and off.
Shows and describes the main interface displayed after the SW-U LCD powers on.
Covers single trip, odometer, and current/average/maximum speed display.
Details Push Cruise Control and Headlight/Backlight control.
Explains PAS level selection, battery indicator, and motor power monitoring.
Ensure the connector is firmly connected before turning on the e-bike power.
Covers trip distance clearance and backlight brightness settings.
Setting the display unit and procedures for exiting setting states.
Procedures for entering and setting the power-on password, including use and modification.
Settings for wheel diameter and speed limits for accurate display.
Restoring the display to its factory default parameters.
Entering the permission password to access personalized parameter settings.
Setting the voltage values for the five battery power bars.
Selecting assist parameter modes and changing PAS level ratios.
Setting the maximum current value for the controller.
Setting the direction of the Pedal Assistant Sensor (forward/back).
Selecting the quantity of magnet heads for the speed sensor.
Enabling/disabling throttle assist and setting throttle vector behavior.
Adjusting delay time of battery power and other system parameters.
Procedures for exiting personalized settings and restoring default parameters.
To Next Page
