KING-METER TECHNOLOGY CO., LTD
No.15, Chenchang Road, Beichen Dist.Tianjin,300134,CN
Fax：+0086 022 8478 0358 Tel: +0086 022 8478 0378
22
setting interface.The default value of the display is 25 (output 25%).
Slowly start up setting
SSP indicates the slowly start up setting. The adjustable range is 1-4.
4 is the slowest. Select by UP / DOWN. Press and hold MODE to confirm and return to the
display personalized parameter setting interface .The factory default 1.
8.5.9 Exit settings
In the personalized parameter setting state: short press MODE to confirm input to enter the
next setting; long press MODE to confirm saving the current setting and exit the current
setting state; long press DOWN to cancel the current operation and exit without saving the
current setting data.
Without any operation within one minute, the display will automatically exit the setting state.
8.6 Restore default settings
DEF means to restore the default parameter .Press and hold the UP and MODE keys at the
same time for 2 seconds to enter the interface of restoring default parameter .Switch y or N
through UP / DOWN.Y indicates that the default parameter need to be restored. Press and
hold MODE to confirm .If you select y, you need to enter the permission password to restore
the default parameter.
To Next Page
Loading...
Need help?
General
