King-Meter SW-U LCD User Manual

KING-METER TECHNOLOGY CO., LTD
No.15, Chenchang Road, Beichen Dist.Tianjin,300134,CN
Fax：+0086 022 8478 0358 Tel: +0086 022 8478 0378
17
8.5.2 Battery power setting
VOL is the battery power setting.The voltage values from 1 to 5 sections are required to be
input one by one.Take the first power value as an example: "1" in the screen represents the
first voltage and "31.5" represents the first power value.Add / subtract the value through UP /
DOWN.Short press MODE to confirm and enter the setting of the next power value.After
setting the five power values, press and hold MODE to confirm and return to the display
personalized parameter setting interface.
8.5.3 PAS level setting
PAS Level Select
SCA indicates the setting of assist parameter. In Pedal Assistant Level Setting , there are 8
modes to select ：0-3, 1-3, 0-5, 1-5, 0-7, 1-7, 0-9, 1-9. Press UP/DOWN to select the mode,
and press MODE to confirm, then change the ratio of each PAS level.

King-Meter SW-U LCD Specifications

General

Brand	King-Meter
Model	SW-U LCD
Category	Bicycle Accessories
Language	English