KING-METER TECHNOLOGY CO., LTD
No.15, Chenchang Road, Beichen Dist.Tianjin,300134,CN
Fax：+0086 022 8478 0358 Tel: +0086 022 8478 0378
7
3. User reminder
Pay attention to the safety during the use of the product, and do not plug or unplug the
display while the power is on.
Avoid bumps.
The outer shell of the display is waterproof. Please do not disassemble it at will, so
as not to affect the waterproof performance of the display.
Please do not change the background parameter setting of the display at will,
otherwise it will not guarantee normal riding.
When the display is not working properly, it should be repaired in time.
4. Installation instructions
Fix the display onto the handlebar and adjust to an appropriate visual angle. Tighten all the
connectors.
5. Operation instructions
5.1 Power on / off
Hold MODE button for 2 seconds then the display will power on, and the display will the power
on the controller. With display on, hold MODE to turn off power supply of the e-bike. With the
display off, the display and controller shut down. The leakage current is less than 1 uA.
When parking e-bike for more than 10 minutes, the display shut down automatically.
To Next Page
Loading...
Need help?
General
