KING-METER TECHNOLOGY CO., LTD
No.15, Chenchang Road, Beichen Dist.Tianjin,300134,CN
Fax：+0086 022 8478 0358 Tel: +0086 022 8478 0378
16
8.5 Personalized Parameter Setting
In order to improve the personalized use of this product, we specially add this setting.It can be
set according to different requirements of users.This setting includes the setting of battery
power bar setting, PAS level, current limit, PAS sensor, speed sensor, Throttle function and
system setting.There are seven items in total. See attached Table 3 for detailed setting items.
8.5.1 Personalized password input
Press and hold the UP and DOWN keys for 2 seconds at the same time to enter the normal
setting state; then press and hold the UP and DOWN keys for 2 seconds at the same time to
enter the personalized parameter setting state.
The screen prompt "PSD. 3" indicates that you need to enter the permission password.Short
press the MODE key to shift and input the value through UP / DOWN.After the 4-digit
password is input, press the MODE key to confirm.If the password is correct, enter the
password setting interface, otherwise it will stay in the password input state.Press and hold
MODE to exit.The password is 2962.
Select the content to be set by UP / DOWN, and press MODE to enter the corresponding
setting interface.
To Next Page
Loading...
Need help?
General
