KING-METER TECHNOLOGY CO., LTD
No.15, Chenchang Road, Beichen Dist.Tianjin,300134,CN
Fax：+0086 022 8478 0358 Tel: +0086 022 8478 0378
15
The screen prompt "PSD. 1" indicates that the authority password needs to be input.Short
press the MODE key to shift and input the value through UP / DOWN.After the 4-digit
password is input, press the MODE key to confirm.If the password is correct, enter the
password setting interface, otherwise it will stay in the password input state.Press and hold
MODE to exit.The authority password is: 0512.
8.4.1 Wheel diameter setting
LD indicates wheel diameter setting.The setting values are: 16inch, 18inch, 20Inch, 22inch,
24Inch, 26inch, 700C, 28Inch.Select the wheel diameter corresponding to the Ebike through
UP / DOWN to ensure the accuracy of display speed display and trip display.Press MODE to
confirm and enter the speed limit setting interface.The default wheel diameter value of the
display is 26inch.
8.4.2 Speed limit setting
Ls means speed limit setting.The default maximum riding speed of the display is 25km /
h.Changing this value can set the maximum riding speed of the Ebike. When the electric
power exceeds the set value, the controller will stop the power supply to the motor to protect
the safe riding.
The maximum speed setting value can be selected from 12km / h to 40km / h.It can be set by
UP / DOWN.After modification, press and hold the MODE key to save, confirm and exit the
setting state.
To Next Page
Loading...
Need help?
General
