Kingon P2 - User Manual

Other manuals for Kingon P2

Questions and Answers

tylerrandolphJul 27, 2025

What to do if my Kingon P2 won't turn on?

M
Monica RichardsJul 27, 2025
If your Kingon Medical Equipment won't turn on, there are several possible reasons. First, the battery might not be installed correctly; try removing and reinstalling it. Second, the battery could be depleted; try using the AC or DC power adapter to operate the device and recharge the battery. Also verify that the AC power supply connection is solid and the green light on the adapter is on. Finally, check the DC adapter connection to ensure it's properly connected.

bhooverAug 12, 2025

What to do if my Kingon P2 has no oxygen?

C
Cameron GuerreroAug 12, 2025
If your Kingon Medical Equipment is not delivering oxygen, first ensure that the device is turned on. Next, check the cannula and its connection to the oxygen outlet port to ensure it is not kinked or obstructed.

Summary

Lists conditions and scenarios where the Kingon P2 Oxygen Concentrator should not be used or requires caution.

Provides essential safety warnings and precautions for operating the Kingon P2 Oxygen Concentrator safely and effectively.

Explains the device's user interface, including control buttons, display icons, and their meanings.

Details various alert messages displayed by the device and the corresponding actions to take.

Provides a step-by-step guide on how to set up and operate the Kingon P2 Oxygen Concentrator.

General

Device Type	Portable Oxygen Concentrator
Battery Life	Up to 4 hours
Category	Medical Equipment
Type	Portable
Display	LCD
Oxygen Flow	1-5 L/min
Noise Level	≤45dB(A)
Parameters	Oxygen concentration, flow rate, battery level, operating time
Power Supply	AC adapter, DC adapter, rechargeable lithium battery