Description of the Kingon P2 Oxygen Concentrator
Power Supply
Standard Lithium Ion Battery # BA-P200
The Kingon P2 will be powered by standard lithium ion battery. When full charged, the
battery can serve for up to 3.5 hours of operation. Recharge the battery by AC or DC
power when installed in the P2. Recharging time is about 5 hours.
AC Power Supply # EM11012E
The concentrator AC supply (EM11012E) is used to power the Kingon P2 Oxygen
Concentrator from an AC power source. when used with AC power sources, the power
supply automatically adapts to input voltages from 100V to 240V(50-60HZ) permitting
use with most power sources throughout the world.
Connect A plug to nearest AC power outlet→connect C plug to D port →connect B plug
to Kingon P2
Do not use power supplies or power cable other than the
specified above.
Do not use power supplies /adapters or accessories other
than those specified above.
The use of non-specified accessories may create a safety
hazard and/or impair equipment performance.
To Next Page
Loading...
