1014336 Issue 01 BioTec+ Control Panel User Manual
3
1. Health and Safety
These warnings are provided in the interest of safety. You must read them carefully before installing or using
the equipment.
It is important that this document is retained with the equipment for future reference. Should the equipment
be transferred to a new owner, always ensure that all relevant documents are supplied in order that the new
owner can become acquainted with the funconing of the equipment and the relevant warnings.
To ensure that the equipment described is safe both for personnel and property it should be installed,
inspected, and maintained by or under the supervision of qualied persons (Electrician)
Covers must be kept locked. Observe all hazard labels and take appropriate acon to avoid exposure to the
risks indicated. Ensure that you are familiar with the safe working areas and accesses. Ensure that the working
area is adequately lit.
The power supply to the equipment should be isolated at the main RCD before liing the blower cover.
Take care to maintain correct posture, parcularly when liing. Use appropriate liing equipment when
necessary. Always keep proper foong and balance. Avoid any sharp edges.
Regard should be taken of IEE Wiring Regulaons, Codes of Pracce, Statutory Requirements, and any specic
instrucons issued by the supplier of these details.
Earthing - All equipment must be earth bonded in accordance with the latest IEE Wiring Regulaons. For clarity
this has not been shown.
We reserve the right to alter these details without prior noce.
2. Declaraon of Conformity
This product meets all the essenal safety requirements of the relevant European Direcves.
The full text of the Declaraon of Conformity can be provided upon request.
3. Technical Data
Functions, sequence program, alarms,
GSM-communication, display messages
(also multi-lingual)
To Next Page
Loading...
