We’ll cover Touch Modes soon, but rst up — presets.
We once ran a test where we set the decay time to
innite and strummed a chord. A week later you could
still hear that ghostly reverb tail droning along...
REVERB DECAY (RD) — At its minimum decay time, the
reverb sounds springy and echoey. As you increase it,
the reverb tail becomes smoother and more diuse.
At max decay it will ring out innitely, creating a
never-ending wash of ambient sound.
You can really change the character of the reverb by
playing with the placement setting.
Putting the reverb before the tape eects creates
more of a haunting and aged sound, whereas putting
it after allows it to ring out nice and clear.
0% REVERB MIX
100% MIX,
POST TAPE EFFECTS
100% MIX,
PRE TAPE EFFECTS
12
To Next Page
Loading...
