Ribbons also features a four-track asynchronous looper.
It can record up to 4 separate stereo loops with a max
recording time of 40 seconds per loop.
To enter Looper Mode, hold down the push button and
press Bypass. The Bypass LED will turn light blue.
The 4 knobs are now used to control speed, direction,
volume, and speed scale (quantization), with each
looper track having its own settings. Use the push
button to toggle between the 4 tracks.
Four-Track Looper
23
T2 — Controls speed and direction, and can be used to
time stretch and reverse your loop. Try setting this knob
around 9 or 3 o’clock when you record, that way you
have room to both speed up or slow down.
C
H
A
N
G
E
D
I
R
E
C
T
I
O
N
C
H
A
N
G
E
D
I
R
E
C
T
I
O
N
0x SPEED, INFINITELY LONG LOOP
(LOW QUALITY)
2x SPEED,
20 SEC MAX LOOP
(HIGH QUALITY)
2x SPEED,
20 SEC MAX LOOP
(HIGH QUALITY)
If you modify T2 while overdubbing new audio,
speed and direction changes get printed to the
loop in real-time, just like an actual tape player.
Double tap Touch to stop playback and erase your loop.
To Next Page
Loading...
