Kinotone ribbons - Broken Machine Mode; Repeater Mode

BROKEN MACHINE (light blue LED)
You can use Broken Machine to add even more random
tape modulation to your signal. At its minimum it can
be used in subtle ways, similar to the wow and utter
parameters, then at its maximum you can get some
really intense rewind eects or abrasive and totally
unpredictable sounds.
T1 — Controls the depth or intensity of the eect.
T2 — Controls the chaos of the machine, so how often
it does something random.
REPEATER (ickering green LED)
Repeater is an audio slicer that can be used to capture
a tiny loop and divide it into smaller subdivisions for
rhythmic or glitchy eects.
INPUT:
OUTPUT:
Repeated
Touch
Pressed
17