(1) Forward / Reverse Lever
(2) PTO Selector Switch (Auto / Manual)
(3) Range Shift Lever (Hi-Mi-Lo)
3. Place the PTO selector switch in
the "NEUTRAL" position.
4. Place the forward/reverse lever in
the neutral position.
5. Place the range shift lever (Hi-Mi-
Lo) in the "NEUTRAL" position.
S76o503a
(1) Hand Accelerator Lever
"Increase" "Decrease"
7. Place the speed control lever in
mid speed position.
(1) Position Control Lever
(A) "Lowering"
6. Push the position control lever
forward. (A: "Lowering")
When lowering the implement, push
the position control lever forward.
S76o504a S76o505a
To Next Page
Loading...
Need help?
General
