9. Turn the key to the "Start" posi-
tion until the engine is started.
10. Check whether all check lamps
are turned off.
8. Wait until the preheat indicator
goes off (About 8 seconds) while
the key is inserted in the key switch
and turned to the "ON" position.
1. As starting the motor needs a lot of
electric current, please do not use it
more than 10 seconds continuously.
2. If it is not started within 10 seconds,
stop and wait for over 30 seconds,
and then repeat the same operation.
3. If it will not start, please do not re-
startbeforetheywheelstops.
4. The tractor will be preheated manu-
ally while the key is turned from
"ON" to Preheat positions.
S76o506a
t91o507a
(1) Key Switch (1) Battery Charge Warning Lamp
(2) Parking brake (3)
Glow Plug Indicator
(4) Engine Oil Pressure Warning Lamp
To Next Page
Loading...
Need help?
General
