The seat installed on your tractor has
a comprehensive range of adjust-
ments. Before prorating the tractor, it
is important to adjust the seat to the
comfortable position.
1. The lever which control the seat
position (up or down) in accordance
with operator’s. Use the lever when
you change the seat position.
2. When you change the seat position
(front or rear), pull the lever up and
push or pull seat to front or rear
direction.
3. When you change the suspension of
the seat, you can adjust the suspen-
sion of the seat using the lever. Pull
the lever front direction and move
the lever left or right.
For one seated occupant.
Do not adjust seat when vehicle
is in operation.
Keep clear of maintenance should
be carried out by authorized &
competent personnel only.
•
•
•
CAUTION
(1) Turn Signal Lamp Switch
Turn the turn signal switch clockwise
to turn right and turn counterclockwise
to turn left.
3. SELECTION SWITCHES
(1) Hazard Warning Flasher / Turn Signal Lamps
(2) Turn Signal Lamp Switch
(3) Hazard Warning Flasher Switch
S76o516a
(1) Seat Belt
2. SEAT BELT
Adjust the seat belt to the proper length
and engage the buckle. The seat belt
is the auto lock foldable type.
S76o515a
To avoid personal injury:
Always wear the seat belt when
the ROPS is installed.
Do not wear the seat belt if the
ROPS is removed or not pro-
vided on the tractor.
•
•
CAUTION
Return the switch to center (OFF)
position after making turns.
•
NOTE
To Next Page
Loading...
Need help?
General
