Kioti NX4510 - Checking Brake and Clutch Pedals (G); Checking Gauges, Meter and Easy Checker (H); Checking Head Light, Hazard Light ETC. (I); Checking Seat Belt(J)

7
-
15
7
-
14
MAINTENANCENX4510/NX5010/NX5510/NX6010
7
7
-
15
7
-
14
MAINTENANCENX4510/NX5010/NX5510/NX6010
CHECKING GAUGES, METER
AND EASY CHECKER (H)
1. Inspect the instrument panel for
broken gauge(s), meter(s) and
Easy Checker lamps.
2. Replace if broken.
CHECKING HEAD LIGHT,
HAZARD LIGHT ETC. (I)
1. Inspect the lights for broken bulbs
and lenses.
2. Replace if broken.
CHECKING SEAT BELT(J)
1. Always check condition of seat
belt and ROPS attaching hardware
before operating tractor.
2. Replace if damaged.
1. The brake and clutch pedals
should be inspected for free travel,
and smooth operation.
2. You should adjust these ped
-
als if an incorrect measurement
is found. (See "Adjusting clutch
and brake pedals" in the 100 hour
maintenance schedule.)
CHECKING BRAKE AND
CLUTCH PEDALS (G)
When depressing the brake
pedal, both of the brake pedals
should be moved down to the
same depth.
•
NOTE
Bonnet Grill and screen must
be clean from debris to pre-
vent engine from overheating
and to allow good air intake
for the air cleaner.
•
IMPORTANT
TE120(NX4510,5010,5510)CABIN,ROP15 15 2016-04-25 오후 5:49:51