Kioti NX4510 - NO Stall Switch; SPEED LIMIT Switch

4
4
-
15DESCRIPTION OF OPERATING SYSTEM
(1) No Stall Button
(A) ON
NO STALL SWITCH
[HST]
This switch is for loader work and to
protect the engine.
In case of momentary engine over-
load.
- Start : No-stall switch on
- Stop : Switch off or key off
(1) Speed Limit Button
(A) ON
TE1O4A9A
SPEED LIMIT SWITCH
[HST]
This switch is to x maximum speed.
e.g. If switch is on with 5 km/hr, the
speed will be 0~5 km/hr no matter
where HST pedal is.
- Start : Forward pedal pressed + limit
speed switch on
- Stop : Switch off or key off

When engine overload occurs
with the NO STALL switch in the
“ON” position, engine load de-
creases to protect the engine.
NOTE

Only for loader work. (Never use
for Trailer work)
IMPORTANT
TE1O4A5A
TE120(NX4510,5010,5510)CABIN,ROP15 15 2015-04-23 오후 4:25:17