Kioti NX4510 - Tractor Troubleshooting

9
-
5
9
-
4
TROUBLESHOOTINGNX4510/NX5010/NX5510/NX6010
9
-
5
9
-
4
TROUBLESHOOTINGNX4510/NX5010/NX5510/NX6010
TRacTOR TROUBLESHOOTING
caUSE cOUNTERMEaSURES
1. When tractor
does not move
while engine is
running

Shift lever is in neutral position

Check the shift levers.

Parking brake is applied

Release the parking brake.
2. Clutch is not
operated prop-
erly

Clutch slips (idles)

Check and adjust the clutch pedal play.

The clutch lining is worn or stuck.
Have it replaced in a workshop.

Clutch cannot be disengaged

The clutch lining is corroded.
Have it repaired in a workshop.

The pedal is incorrectly adjusted. Adjust the pedal play.
3. Brake is not
operated prop-
erly

Brake does not operate or only
one brake pedal operates

The brake pedal play is excessive. Adjust the play.

The brake lining is worn or stuck.
Have it replaced in a workshop.

Brake pedal does not return
properly

The brake return spring is damaged. Replace it.

Grease is insufcient on each mating surface.
Remove rust and apply grease.
4. Steering wheel
is not operated
properly

Steering wheel is heavy or
vibrates

The toe-in is incorrect. Adjust it again.

The tire ination pressure is different. Inate the left and right tires into
the specied pressure.

Each connection is loose.
Re-tighten each connection and replace the part.

Steering wheel play is excessive

The steering wheel shaft is worn. Have it repaired in a workshop. Metal
parts are worn. Have them repaired in a workshop. Each connection
has play.
Tighten the connection again.
TE120(NX4510,5010,5510)CABIN,ROP4 4 2013-11-05 오후 4:31:47