Kioti NX4510 - Page 255

9
-
5
9
-
4
TROUBLESHOOTINGNX4510/NX5010/NX5510/NX6010
9
9
-
5
9
-
4
TROUBLESHOOTINGNX4510/NX5010/NX5510/NX6010
caUSE cOUNTERMEaSURES
5. Hydraulic sys
-
tem is faulty

Oil is leaked from pipe or hose

The pipe clamp is loose. Re-tighten it.

The pipe is cracked. Have it repaired in a workshop.

3-point hitch cannot be lowered

Set the lowering speed control lever to the lowering position if it is set
to the stop position.

The valve and cylinder are damaged.
Have them repaired in a workshop.

3-point hitch cannot be lifted

The transmission uid is insufcient. Add it to the specied level.

There is air in the intake pipe. Bleed the pipe.

The oil lter is clogged. Clean or replace it.

The hydraulic lter, valve and cylinder are malfunctioning.
Have them repaired in a workshop.

3-point hitch ROPS itself

Set the draft control lever to the "Deep" position.

Select the highest top link hole.
6. Electric system
is faulty

Headlamps cannot be turned on
or are dim.

The fuse is blown. Check the wiring and replace the fuse.

The bulb is blown. Replace it.

The ground and terminal wirings are poorly contacted.
Check and clean them.

The battery electrolyte level is low. Charge the battery.
TE120(NX4510,5010,5510)CABIN,ROP5 5 2013-11-05 오후 4:31:47